Prime
- Power/Ground Distribution Block
- 1-0/2/4 Gauge AWG In,2-4/8/10 Gauge AWG Out
- Made of High Performance Copper
Prime
- This power distributor is ideal for model railways, miniature cities, miniature gardens, miniature street lamps and provides wiring ports.
- Parameters : Maximum operating current 3A, enough for 12 mini street lights.
- Size : Product size 97 x 22mm, port spacing 7.5/5mm.
Prime
- Power/Ground Distribution Block
- 1x(0/2/4) Gauge AWG In,2x(0/4/8/10) Gauge AWG Out
- Made of High Performance Copper
Prime
- 180 A 48 V Busbar: The busbar has a continuous current rating of 180 A. The maximum voltage for the terminal block is 48V DC, the rated voltage is 12V DC, the rated current for each terminal is 15A.
- High-Quality Material: The bus bar with lid is made of high-quality ABS, zinc alloy and brass, rust-proof, sturdy and durable. Exquisite workmanship, long service life.
- With Rubber Shell: Our bus bar comes with a protective rubber shell that prevents the lugs from being scratched and keeps them in perfect contact with the terminals. Bus bars provide a neat and clean finish for any installation in your car.
Prime
- Package included: 2 Set Power Distribution Board.
- Size:Approx.9.5cm or 3.74inch(L),1.87cm or 0.74inch(W).
- Max. Current via individual outputs: 10 A (observe total current).Max. External operating voltage: 24 V ~ / -.
Prime
- Material: Solid Nickel plated with plating for corrosion resistance, snap-in Industrial-grade Plastic Cover. Ensures you get the longevity out of your system that you expect
- 4-Way Connection: ideal for multi car amp systems, nickle plated internal materials eliminates the possibility of corrosion, rust, oxidation, or premature wear on speaker wire connection points.
- Easy to Install: Screw-down wire clamps, impact resistant snap-on plastic cover, ensures you get the longevity out of your system that you expect.
Prime
- 𝐏𝐫𝐞𝐦𝐢𝐮𝐦 𝐌𝐚𝐭𝐞𝐫𝐢𝐚𝐥𝐬: 12 V - 48 V 𝗯𝘂𝘀 𝗯𝗮𝗿 distribution block made of reinforced, flame-retardant, and conductive nylon material that offers excellent strength and durability
- Safety: Each 𝗯𝘂𝘀 𝗯𝗮𝗿 𝟭𝟮 𝗩 is equipped with a cover to protect the connections from damage. The insulating nylon base is flame-resistant, ensuring safe usage
- 𝐄𝐚𝐬𝐲 𝐎𝐩𝐞𝐫𝐚𝐭𝐢𝐨𝐧: Use the screws to secure the 𝟭𝟮𝗩 𝗽𝗼𝘄𝗲𝗿 distribution block bus bar in place, wire the screws, and tighten the nuts to fix everything securely
Prime
- High-Capacity Power Distribution – Up to 250A/48V: Rated for 250A at 12V and 40A at 48V, these bus bars ensure stable, high-current power transmission for cars, RVs, boats, and solar systems. Includes 4 x M6 (1/4") studs + 6 x M4 screws for versatile connections
- Professional Materials for Safety & Conductivity: These busbars are made with pure copper conductors and zinc alloy screws/nuts for rust-proof durability and optimal conductivity. Insulated PC base prevents short circuits, ideal for marine and automotive use
- Open-Frame Cover Design for Easy Wiring & Protection: These terminal block features a heat-resistant, transparent ABS cover to block dust and accidental contact while allowing 180° wire lug installation. The modular design of high-current distribution block supports flexible adjustments and neat cable management
Prime
- 【High Quality】This 12v distribution block with stainless steel studs, lock washers and nuts is sturdy and rust-proof. The base of distribution block is made of flame-retardant plastic to protect your safety and ensure good mechanical strength and durability. Battery terminal distribution block is less affected by temperature extremes and more resistant to chemicals.
- 【Excellent Size】Terminal block size is 1.77inches x 1.69inchesx 1.3inches/45mm x 43mm x 33mm. Base: 0.47 inches/1.2cm. Maximum amplifier per bus bar terminal block: determined by connected wires. Maximum working voltage: DC 48V and up to 200 Amp. NOTE: Be gentle when tightening blue sea systems or the nut threads will come out.
- 【Easy to Install】The surface screw mounting of the terminal block and two mounting holes make battery distribution block easier to install in any direction. Made of rust resistant stainless steel, once you install one of these studs, you'll never have to think about 12v distribution block again.
Prime
- Material: The bus bar is composed of brass bottom plate and 304 stainless steel screw terminals, which is not easy to rust; The protective sleeve and base are made of nylon, which is flame retardant, can prevent electrical short circuit and is safer
- Operating Voltage/Amperage range --- Max voltage: 48VDC. Max continuous amperage: 250A for the entire connection. Maximum intermittent: 20A for each connection (less than 1 minute). So whether your working on a boat, a car, or an RV, we've got you covered.
- M8 Stud: The battery bus bar terminal block includes 4 xM8(5/16) studs terminal and 3 x #8 screw terminals, which makes the 12V junction block able to accept large size terminal connectors and wires. The nylon bottom is also secured by M8 post which makes it more fixed and won't strip
No products match your filters
Conclusion: power distribution blocks
Frequently Asked Questions
Related Lists
Why Trust This List?
Data-Driven Selection
Analysis of 0 verified customer reviews
Regularly Updated
Last updated 3 місяці тому
Independent Analysis
Objective criteria: rating, price, popularity
Topelio participates in the Amazon Associates Program. We may earn commissions on purchases through our links, without affecting our recommendations.